Design on a Dime

Standard

I’m always on the hunt for inspiration, and I have a vision in my head as to how I want the master bedroom to look like.  I came across this “Inspiration Room,” and have begun to gather items that compliment this room.  However, I am adding my own little twist and creativity- especially with my furniture, which has been Renewed & Reloved… I will show you all that later!

Image

In a previous post, I had mentioned that my mother and I were walking around Jordans Furniture.  I came across these GORGEOUS lamps.  I had just purchased a king bed frame with upholstery nail heads along the top.  When I saw this lamp I almost grabbed it right there and ran to the register, but saw the price and I HAULTED!!!

Image

This lamp is beautiful and all that- but they were priced at $359 each- seriously?  No way…. so I decided to make my own, and I was immediately on the hunt for burlap shades, the bases would be easy to find, and they didn’t have to be this exactly.  My friend Liza and I headed to Home Goods- which I have to say is either a hit or miss… but I was pleasantly surprised when I was checking out at the register and saw two lamps that had been returned… They were rustic, romantic, AND HAD BURLAP ROUND SHADES!  Here are the top of the shades:

Image

Ok, lamps and shades check… now I needed to order upholstery nails.  I went on Amazon.com and purchased upholstery nails that match the upholstery nails that run along the headboard of the king bed.

Image

Now, for those of you who know me, known that I am NOT very good at math, so I was nervous about my measurements, but shockingly it ended up perfect!  I used a flexible measuring tape to measure the circumference of the top and the bottom, because the bottom was wider.  The tacks are 1/2″, and I wanted them to be spaced at 1″ so I took the circumference and divided it by 1.5″ and figured out how many I would need.  Pretty smart, I know.

Image

So I got to it!  I started in the back, along the seam of the shade, because I wanted the sides and front to be perfect, and I knew the back would be off about 3/8″ (something you would barely notice, but I knew I would….).  The process was fairly easy.  You just need to make sure that you’re keeping an eye out to make sure they stay in line with each other.

Image

I have to say the process was easy enough, and it only took me an hour to do both shades.  They came out really great!

Image

ImageImage

So here is the break down of how much I saved, I saved a total of $595.31 by doing it myself!

Image

BOO-YAH! I rocked out!!!

Here are the lamps all put together with their bases:

image 5 image 6

Advertisements

Want to see a magic trick? Pick a color, ANY color!

Standard

Any Interior Decorator or novice home decorator will tell you that paint “makes it” or “breaks it.”  Honestly.  When I first purchased my home it had bright bold colors and faux finishes on the walls that made it hard to see the potential the house had.  I think the home’s decor and colors deterred a lot of buyers, and I have a feeling that is why it was on the market for quite some time. Just remember that paint is cosmetic, and can always be changed.  My advice to you: when you go to a home, try to look past the old color, mentally remove their furniture, and envision something completely different- you’ll be in good shape!  However, if you don’t have taste or style and like that sort of ridiculousness- then there is no hope for you!  Anyway, once you get the home, and you pass papers and all that headache…. it’s time to create your color palette!  Know upfront that I ONLY use Benjamin Moore for home interior and exterior.  It’s just a far superior paint, covers very well, and is an exact match to it’s sample.  When doing interior walls, I almost ALWAYS choose an Eggshell finish.

ImageImage

Personally, I think it is very important to keep the rooms flowing together; separating them too much with contrasting colors makes a home look choppy.  One way to keep things consistent is by choosing one color and using the variety of shades on the same strip.  The colors will go up or down a degree, but don’t divert too far from the original.  Another option is picking a solid base.  What I mean is- if you want to do creams make sure that all your colors have a cream base… don’t mix a cream room with a blue based room and then a green based room… too confusing!  All in all, the  key is to getting them to look good together.  However, if you are like me…. then you pick a sh*t ton of samples, and don’t know what you want to do….  I like to lay out the floor plan- in this case upstairs and downstairs.

Image

By laying out the floor plan, I can easily visualize what the colors will look like going from room to room.  They are also easily moveable, and I can toss them around until I get the desired look.  This may take YOU two minutes, this unfortunately takes ME days because I keep going back to the paint store for more samples, but I know how to pick paint- i’ll tell you that!

Sometimes I get ahead of myself, so I’ve decided to focus on the downstairs first, get the paint on the wall, and re-group.  Here is what I have come up with so far….

I have chosen Shenandoah Taupe for the dining room:

Image

I have chosen Baby Fawn for the family room/hallway/stairs/landing:

Image

I have chosen Broken Arrow for the Kitchen:

Image

and lastly, I have chosen Texas Leather for the downstairs half bath:

Image

They all look really good together.  Although they have the same taupe/cream undertone they provide each room with its own unique look.  I will keep you posted as we start to paint, and I’ll be sure to share pictures!  Once I get the upstairs figured out I will let you know- back to the drawing board, here goes another two days!

Follow me on Facebook! https://www.facebook.com/pages/Renewed-Reloved/434213956609660

Behind, in front, can’t get around the candelabra!

Standard

Ok, all my posts so far have been “tips and techniques” and “progress” posts, but let’s lighten it up with something funny.  I have been shopping around looking for an upholstered head board; online, in stores etc…. My mother and I headed to Jordans Furniture so I could buy a new mattress, and we figured while we were there that we might as well look for some bed frames.  I love walking through the showroom floor, everything looks so nice, and you can get some great decorating inspiration.  However, when we turned the corner, we both almost sh*t!

OLYMPUS DIGITAL CAMERA

We had come face to face with Liberace’s bedroom set.  It even had its very own candelabra.  I of course think this is hilarious, and wonder who would actually buy this set, aside form the man himself!  I didn’t just move on, I laid on it and felt like Cleopatra.  Liberace my man, you were on to something….

image

Then again, he WAS the man and could do whatever he wanted.   If the bed wasn’t enough for you, perhaps you want to accessorize the room with full blow sparkly/glittered furniture.  Did I mention the price?  YIKES!

OLYMPUS DIGITAL CAMERA

I digress…. I did find something that I absolutely LOVED, and ordered it with my new mattress, I know I will sleep soundly!  I found a gorgeous upholstered headboard/footbard/frame studded with antiqued bronze/brass upholstery nails.

bed

https://www.facebook.com/pages/Renewed-Reloved/434213956609660

Scruba-dub-dub, but NOT in a tub!

Standard

For those of you who know me, know I am OCD, and I tend to go a bit overboard with cleaning, but when it comes to taking over some one else’s old home… I’m gonna strip that baby down!  From my last blog post, you saw that I had removed all the cabinet faces and doors.  Now that I packed them up into my trunk, and lugged them to my parents house, it was time to clean them!

Image

 

I set up a system on the kitchen table- I laid out the labeled cabinet and drawer faces on the kitchen table, a little at a time: there are 21 total faces that need to be cleaned….. yeah I KNOW- A LOT.

Image

I had gone down to the Home Depot to find some industrial grade cleaning supplies- Dawn was just NOT gonna cut it.  I bumped into this woman in the aisle, and we started making small talk about cleaning.  I told her I had a lot of grease to deal with, and she suggested “Zep..” I was intrigued- do tell me more!  I thanked her and started looking at all my options.  There are plenty of Zep cleaners, but I was looking for something serious- nuclear warfare style. I found Zep 505, grabbed some gloves, sponges, and stainless steel brushes… I’m not going to lie- I rushed home to get started, I was very excited (sick, I know).

Image

I cut down a huge black trash bag to cover the surface of the Butcher Block, and placed ONE face at a time on there.  I put the posit it at the top right of the butcher block to make sure it followed the damn cabinets everywhere.  At first I was spraying the faces, letting it sit for a second, and using the front and back of the sponge to clean it.  It just wasn’t cutting it.  I busted out the stainless steel brush and went to town.  I can’t even describe to you the amount of grease that I scraped off each face.  I scrubbed and scrubbed.  I rinsed each cabinet after and hand dried them.  Some of them I had to re-wash/scrub because there was still some residue.  I managed to get into every nook and cranny!  I dried them off, and replaced the post-its.  I started placing the dry clean faces on a drop cloth in my parents dining room.  Have I mentioned they are less than thrilled that I have turned their home into a temporary workshop?

Image

Look how beautiful they are, all clean and pretty!  I couldn’t stop there though…. I realized that I spent (in total) 5 1/2 hours cleaning the faces (front and back) of these cabinets and doors, but the cabinet frames were left untouched…. so I went back to my new house, took a look around and realized  I had my work cut out for me.

Image

Every single shelf had faux marble contact paper on it.  No surface had been left untouched!  I personally can’t stand it, so I started ripping it off, and it must have been there for a while, because it came off easily.  Unfortunately, when you remove the contact paper it leaves a sticky residue behind.  So gross.  I knew all the surfaces would have to be cleaned.  So I got my bucket of hot hot water (scalding actually), my gloves, and brushes, and started with the bottom cabinets.  I knew instantly two things: 1) This was going to take forever and 2) I couldn’t stop I HAD to finish (OCD)- it’s a double edged sword. I knew I would feel better once I finished, but it was going to take a while to get there.  I scrubbed inside the cabinets, drawers, and the outsides, and even the hinges and drawer tracks.  This time it was ME who left no surface untouched! TAKE THAT!

 Ok, so at this point I am 4 hours in, a little delirious, but still motivated.  Jammin’ to a mix of Dave Matthews Band and Elvis in the background, I reached the range and overhead microwave.  Now I gave them a good stern look, and realized this was going to be a nasty job.  I had the cleaners come in, and they did the top of the range, and it looked great, but they didn’t do the underside of the microwave, or the walls next to the range….

 OLYMPUS DIGITAL CAMERA  OLYMPUS DIGITAL CAMERA

Honestly, when I looked under the microwave and adjacent cabinets and walls I almost vomited.  The surface was ORANGE with grease.  GROSS, GROSS, GROSS.  The wall to the right, was COVERED with grease splatter.  I began to panic.  I sprayed the surface, soaked it with hot water, and waited.  I loosened the gunk up a bit with a scratch sponge, but re-applied the cleaner.  At this point I have probably taken off about 10 years of my life because I didn’t use a mask- though I did use gloves, so give me some credit….  I used the stainless steel brush- brush brush brush brush…. but still the grease remained.  So I resorted to a flat razor.  I LITERALLY scraped the grease from the underside of the cabinets and wall.

Good news it, I managed to get it all done; Bad news is: it took me a total of 5 hours to clean all the cabinets and walls.

https://www.facebook.com/pages/Renewed-Reloved/434213956609660

Shovels, and Rakes, and Sifters, OH MY!

Standard

One thing I REALLY don’t like doing is landscaping.  I love the outcome, but I hate putting in the manual labor.  Don’t get me wrong, I don’t dislike all landscaping- I like planting flowers and watering them…. but as for the heavy duty stuff- I’m all set.  My backyard is decent, but things can always be improved, right?  That’s what I thought.  The other day I posted this lovely picture on Renewed Reloved’s facebook page, and mentioned that my gate opens to my backyard just like it. 

However this one is so nice and tidy, clean and pretty…..

Image

THIS is my reality

Image

See the similarities? Haha, no not yet, but the potential is there!  One thing I HATE is when people use stones and little pebbles to fill in their landscaping.  I know its easier than maintaining grass and flowers, but they end up everywhere.  Knowing my dogs, they will eat them, throw them in the air, and they will end up all over creation.  So my father, Mikey, and I have started shoveling out the stones and sifting them.  

Image

One thing you need to know about my dad… he LOVES to sift. Sift, sift, sift!  He always says “the dirt always comes out better this way!”  I think it ends up like powder and is harder to manage, but if it makes him happy- sift away!

The three of us managed to rake up a huge section of moss/crab-grass/stone and it looks a hell of a lot better.  We will continue to work our way down.  I’m trying not to feel anxiety as I look at all those stones… I’ve started pricing out sod, which I think will be the easiest thing to do.  I could potentially wait forever for the seed to catch, and in the meantime my dogs will track in mud through the house.  I think sod is an overall good investment for time and mental stability.

ImageImage

Other yard work for the day consisted of the steps leading out from the dining room slider to the back yard.  I knew from inspection that the stairs were a tripping hazard, but found it hilarious when I started taking them apart.  So the structure of the stairs consisted of cinder blocks around the base, and built up to the top.  However, in the middle was merely mud and bricks on the surface….I’m pretty sure if you were heavy enough you could step right through it.  

Image

In one heave-hoe Mikey managed to yank out the whole side- literally the entire side.  Apparently the only thing holding the cinder blocks together was liquid nails. 

Image

We pulled the bricks out from the middle, which were merely resting on dirt, and put them aside; they may come in hand later, you never know!

Image

Within 20 minutes, all the steps were ripped apart, and all we were left with was a mound of dirt to sift.  Guess who was all excited about that? Yup you guessed it- Dad jumped right on it- look at his bucket over there with the screen!

ImageImage

got it down to the pressure-treated wood.  What does that mean? and why should you care?  If you are going to do the work you might as well do it right! The piece of wood on top of the pressure treated wood was peeling, chipping and had some water damage.  Putting on new wood will provide the landing (whatever I decide to do with it) a solid start.  So there you have it, all in a days work!  Back to sifting rocks.  See you in a year <<sarcasm>>.

Poppin’ Tops!

Standard

Today my father and I needed to get the kitchen counter top off and the master bath vanity top off.  Pacific Stone is sending some one out tomorrow morning to make a template for the new granite.  Let’s just say that the cabinets and countertops are built like a brick sh*t house.  We had to take turns laying under the counter to remove screws, but we managed!

ImageImage

 

I also removed about 100 child proof locks, and I thought that maybe I should keep them on there to keep me from eating myself into a coma, but I knew I was too smart for those locks and would find my way in anyway!  Anyway, We couldn’t remove the counter tops until we removed the sink, no problem…. well we couldn’t detach the damn garbage disposal!  After a half hour of trying to finagle the damn thing off, I said screw it!  I went in the basement, shut off the power to the kitchen and yanked the cords out of the garbage disposal!  Problem Solved!

Image

It was smooth sailing from there.  Now you see it, Now you don’t!

Image

Here is the Master Bathroom!  All ready to go for the new granite.  When we took the top off some of the wall was literally peeling away, but that’s an easy fix: just a bit of plaster and it’s good as new!

Image      Image

All Around The World….

Standard

If my realtor (and friend) see’s this blog post he is going to kill me.  He advised me not to spend money to renovate, but you and I both know that is just foolish.  I knew that I definitely wanted to put granite in the kitchen.  I plan on giving the kitchen a cosmetic facelift, but whats the point when the counters are crusty?  Well….. I ventured on Groupon, and found a local granite/marble company that was offering a special.  I honestly made out like a bandit.  They are doing my kitchen countertops AND the master bath vanity with double sinks.  Sounds awesome, and easy right? Awesome- yes, easy-no!  They sent me to Leamar to pick out my granite.  I have to note, they were WONDERFUL, very nice and so very patient (cause Lord knows I will look at something ten times before I can make up my mind)…..

Image

I knew when I went there I was to look at two different stones: Caramel Crema and Alaska White (like you care what they are called….). I had a budget and had to stick to it, but let me tell you something…. when you walk into this ridiculously huge warehouse fillllllled with pieces of granite and marble from all around the world your mouth drops.  I was like a kid in a candy shop.  “oooo that’s pretty, how much is that?” He would simply reply “you need less than 40 square feet and that would cost you about $75,000,” I almost sh*t my pants and simply chuckled “I sure know how to pick ‘em!”

Image

Rows, upon rows, upon rows of slabs all for my choosing!  I was shown the piece that was right on budget (Caramel Crema) and I really liked it.  It has a great array of colors- creams, greens, grays, black, white… a mixture of everything really and a consistent pattern which will look good on a small surface.  However, I still wanted to see the other one (Alaska White) in person.

Image

The (Alaska White) slab was gorgeous, but I knew it was way over budget, so I crossed that off the list- phew.  It also helped seeing in person.  Yes, it is a beautiful slab, but it has a lot of movement.  By “movement” I mean a variety of pattern, it’s different all through out the slab, so everywhere you look is different.  Knowing that I only have a small amount of counter space to cover, I knew that the movement in this stone would not be appreciated and it would look to sporadic.Image

But then, I found myself eyeing a piece around the corner.  I should have ran, I know I should have, but I am gluten for punishment.  Well I came across this GORGEOUS slab, and the man told me “this is a higher priced stone…..” and I said “I understand, but what is this one called?”…. when he ever told me it was called “Crazy Horse” the historical buff in me got all pumped up! I made note to get a price on that piece too.  The poor man appeased me, thank god.  Although my mother was right there in my ear reminding me to stay on budget.  It didn’t hurt to get a price though, right?

Image

Well.  The wonderful people over at Pacific Stone in Maynard, MA provided me a quote for the two slabs that I chose.  As it turned out, “Crazy Horse” was way over budget, and will have to stay true to it’s historical state- in the past.

Pacific Stone will be coming on Thursday to do the template for the kitchen and master bath.  Now I just need to pop off the counters- that’s tomorrow’s assignment!